diff --git a/main.c b/main.c
index b273483..80fa5c1 100644
--- a/main.c
+++ b/main.c
@@ -1,3 +1,4 @@
+#include<avr/power.h>
 #include<util/delay.h>
 #include<avr/io.h>
 #include"fix_fft.h"
@@ -29,9 +30,21 @@
 //7-	880
 //8-	1kHz
 //
-const float log_scale = 64./log(64./SCALE_FACTOR + 1.);  
+
+const float log_scale = 64./log(64./SCALE_FACTOR + 1.); 
+
 
 int msec;
+
+ISR(TIMER1_OVF_vect)
+{
+if(msec<100)
+{
+	msec++;
+}
+else msec=0;
+}
+
 int main (void)
 {
 		int i,i2;
@@ -42,13 +55,17 @@ int main (void)
 		char im[64];
 		char buff[64];
 		char temp;
+
+		float fac_r=0.5;
+		float fac_g=0.5;
+		float fac_b=1;
 		msec=0;
 		struct cRGB led_bar1[8];
 		//DDRB = (1<<mic);//would be setting output, default is input so no need for setting
 		setupADC();
 		setupTimer();
 
-		OSCCAL = 240;//overclock!!! to 30MHz
+		OSCCAL = 250;//overclock!!! to 30MHz
 		for(i=0;i<8;i++)
 		{
 				led_bar1[i].r=0;
@@ -75,14 +92,14 @@ int main (void)
 										//
 						sum+=sample[i];//dc-bias
 				
-						//while(msec==0);
+						//while(msec<=1);
 				}
 				avg = sum/64;//calculate bias
 				for(i=0;i<64;i++)
 				{
 						sample[i]-=avg;//remove bias
 				}				
-				fix_fftr(sample,6,0);//im[i] is always zero
+				fix_fftr(sample,6,0);//im[i] is alwa§§ys zero
 //####Averaging Data####
 //
 				for(i=0;i<64;i++)
@@ -104,17 +121,17 @@ int main (void)
 
 						if(sample[i]<20)
 						{
-								led_bar1[i].r=0;
-								led_bar1[i].g=0;
-								led_bar1[i].b=sample[i];
+								led_bar1[i].r=(char)sample[i]*fac_r;
+								led_bar1[i].g=(char)sample[i]*fac_g;
+								led_bar1[i].b=(char)sample[i]*fac_b;
 						}
-						else if(sample[i]<40)
+						else if(sample[i]<30)
 						{
 								led_bar1[i].r=0;
 								led_bar1[i].g=sample[i];
 								led_bar1[i].b=sample[i]/2;
 						}
-						else if(sample[i]<60)
+						else if(sample[i]<50)
 						{
 								led_bar1[i].r=sample[i];
 								led_bar1[i].g=0;
@@ -133,12 +150,13 @@ int map(int value, int old_min, int old_max,int new_min, int new_max)
 
 void setupTimer(void)
 {
-		TCCR1 = (1<<CS13)|(1<<CS10)|(1<<CTC1);										//clear timer on compare match
+		clock_prescale_set(0);
+		TCCR1 = (1<<CS10);//(1<<CS13)|(1<<CS10)|(1<<CTC1);										//clear timer on compare match
 		GTCCR = 0;												//default values should be ok
-		OCR1C =	117;											//Compare value of timer / overflow , sets OCF1A
-		OCR1A = 117;
-		TIMSK = (1<<OCIE1A);//|(1<<TOIE1);			//enable interupt compare a
-		TIFR =	(1<<OCF1A); 			//flag register "aka when to interrupt
+		//OCR1C =	117;											//Compare value of timer / overflow , sets OCF1A
+		//OCR1A = 117;
+		TIMSK |= (1<<TOIE1);//|(1<<TOIE1);			//timer0 ovf 
+		TIFR |=	(1<<TOV1); 			//flag register "aka when to interrupt
 }
 /*
  * 1/(30Mhz/16384) *255 = 0.139264s  Time for one overflow
@@ -153,8 +171,5 @@ void wait_period(void)
 	//	TIFR |=(1<<TOV1);			//clear overflow flag
 }
 
-ISR(TIMER1_COMPA_vect)
-{
-	msec++;
-}
+
 					
diff --git a/makefile b/makefile
index 7e8b08c..e91836a 100644
--- a/makefile
+++ b/makefile
@@ -10,7 +10,7 @@ FORMAT = ihex
 TARGET = main
 SRC = $(TARGET).c avr_adc.c fix_fft.c light_ws2812_AVR/Light_WS2812/light_ws2812.c 
 ASRC = 
-OPT = s
+OPT = 0
 
 # Name of this Makefile (used for "make depend").
 MAKEFILE = Makefile
@@ -28,7 +28,7 @@ DEBUG = stabs
 CSTANDARD = -std=gnu99
 
 # Place -D or -U options here
-CDEFS = -DF_CPU=30000000UL
+CDEFS = -D F_CPU=32000000UL
 
 # Place -I options here
 CINCS =