diff --git a/main.c b/main.c
index f047aae..f0ca7a6 100644
--- a/main.c
+++ b/main.c
@@ -11,39 +11,6 @@ typedef struct
 	unsigned char b;
 	int time_hold;
 }rgbval;
-void toogletimer()
-{
-		static timer=1;
-		if(timer==0)
-		{
-				TCCR0A &= ~((1<<COM0A1) | (1<<COM0B1));// |(1<<WGM01) | (1<<WGM00));
-				TCCR1 &= ~(1<<COM1A0);
-				GTCCR &= ~(1<<COM1B1);	
-		}
-		else if(timer==1)
-		{	
-
-			DDRB = (1 << PB0 )|(1<<PB1)|(1<<PB4);
-			TCCR0A = (1<<WGM01)|(1<<WGM00)|(1<<COM0A1)|(1<<COM0B1);	//mode
-			TCCR0B = (1<<CS01);//|(1<<CS02);				//frequency /8
-							   //
-
-			TCCR1 = (1<<COM1A0)|(1<<CTC1)|(1<<CS12)|(1<<CS10);//|(1<<CS11)|(1<<CS13);	//frequency
-			GTCCR = (1<<PWM1B)|(1<<COM1B1);				//mode + overrun clear
-			OCR1C = 255;						// clear timer at 255	
-		//######PWM_VALUE$
-			//timer 0
-			OCR0A = 128;
-			OCR0B = 1;
-			//timer 1
-			OCR1B = 1;
-		//######Configure Pullups
-			PORTB |= (1<<PB2);
-
-		}
-		timer = 1-timer;
-
-}
 
 int main (void) {            // (2)
 
@@ -58,7 +25,6 @@ int main (void) {            // (2)
 	int r,g,b = 0;
 	int set=0;
 	int input=0;
-	int stop_timer=3;
 //system_clock prescaler
 
 //#######OC0A auf ausgang
@@ -66,13 +32,11 @@ int main (void) {            // (2)
 //#######Timer0-setup#####
 	TCCR0A = (1<<WGM01)|(1<<WGM00)|(1<<COM0A1)|(1<<COM0B1);	//mode
 	TCCR0B = (1<<CS01);//|(1<<CS02);				//frequency /8
-					   //
-
 //	PLLCSR |= (1 << PLLE) | (1 << PCKE);
 //######Timer1-setup
 
-	TCCR1 = (1<<COM1A0)|(1<<CTC1)|(1<<CS12)|(1<<CS10);//|(1<<CS11)|(1<<CS13);	//frequency
-	GTCCR = (1<<PWM1B)|(1<<COM1B1);				//mode + overrun clear
+	TCCR1 = (1<<COM0A0)|(1<<COM0A1)|(1<<COM0B0)|(1<<COM0B1)|(1<<CTC1)|(1<<CS12)|(1<<CS10);//|(1<<CS11)|(1<<CS13);	//frequencyi //iinverting PWM because 0 dtc not possible
+	GTCCR = (1<<PWM1B)|(1<<COM1B1)|(1<<COM1B0);				//mode + overrun clear, Set on compare match
 	OCR1C = 255;						// clear timer at 255	
 //######PWM_VALUE$
 	//timer 0
@@ -83,7 +47,6 @@ int main (void) {            // (2)
 //######Configure Pullups
 	PORTB |= (1<<PB2);
 
-          
    while(1)
    {
 
@@ -107,39 +70,23 @@ int main (void) {            // (2)
 						if(i2==6)
 						{
 								i2=0;
-								stop_timer=1;
 						}
 						//cycle through and stop pwm at value 0
-						if(stop_timer==1)
-						{
-							toogletimer();
-							stop_timer=0;
-								//PORTB &= ~((1<<PB0) | (1<<PB1) | (1<<PB4));
-						}
-						else if(stop_timer==0)
-						{
-							stop_timer=3;
-							toogletimer();
-						}
-						if(i2>0)
-						{
+
 						//Visual feedback "mode change"
-							for(i3=0;i3<i2;i3++)
-							{	
-										OCR0A=1;OCR0B=1;OCR1B=1;	
-										_delay_ms(30);
-										OCR0A=255;OCR0B=255;OCR1B=255;
-										_delay_ms(30);
-							}
+						for(i3=0;i3<i2;i3++)
+						{	
+									OCR0A=1;OCR0B=1;OCR1B=1;	
+									_delay_ms(30);
+									OCR0A=255;OCR0B=255;OCR1B=255;
+									_delay_ms(30);
 						}
 				}
-			   else if((input & (1<<PB2) != 0))
+			   else if(((input & (1<<PB2)) != 0))
 			   {
-				set=0;
+					set=0;
 			   
 			   }
-if(i2>0)
-{
 		if(r < pattern[i2][i+1].r) {r++;}
 		if(r > pattern[i2][i+1].r) {r--;}	
 		if(g < pattern[i2][i+1].g) {g++;}
@@ -152,7 +99,6 @@ if(i2>0)
 		OCR1B = b;//blue
 		_delay_ms(10);
 	  	if(r == pattern[i2][i+1].r && g == pattern[i2][i+1].g && b == pattern[i2][i+1].b) break;
-}
 		}
 	   }